NETGEAR 48x10/100 PoE Smart Switch +4xGig, FS752TP - FS752TP-100EUS

PROSAFE 52-Port Fast Ethernet PoE Smart Switch with 4 Gigabit uplink ports FS752TP

• 48 PoE-capable ports with PoE Plus supports on the first 4 ports
• Packaged with enterprise-class features such as static routing, Access control and multicast management
• Cost-effective solution for large VoIP and video surveillance deployments

Specifikace: Network Protocol and Standards Compatibility IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-X IEEE 802.3× full-duplex fl ow control IEEE 802.3af (Power over Ethernet) IEEE 802.3at (Power over Ethernet Plus) for the first 4 ports

Power Supply Power consumption: 539W maximum 100–240VAC/50–60-Hz universal input PoE budget: 384W

Network Ports 48 10/100 Mbps auto sensing Fast Ethernet 4 10/100/1000 Mbps auto-sensing gigabit Ethernet switching ports (RJ-45) 2 Dual Personality SFP slots

Physical Specifications Dimensions: (w x d x h)– 440×316×43mm (17.3×12.4×1.7 in) Weight: 4.87 kg (10.74 lb)

Electromagnetic Emissions CE EN 55022, EN 61000 and EN 55024 FCC Part 15 Class A VCCI Class A C-Tick KC CCC

Environmental Specifications – Operating temperature: 32° to 122° F – (0° to 50° C) Storage temperature: –4° to 158° F – (-20° to 70° C) Operating humidity: 90% maximum – relative humidity, non-condensing Storage humidity: 95% maximum – relative humidity, non-condensing Operating altitude: 10,000 ft – (3,000 m) maximum Storage altitude: 10,000 ft – (3,000 m) maximum

LEDs Per port (10/100 and Gigabit): – Link/ activity, speed Per device: Power, Fan, PoE Max, LED Mode Per PoE port: PoE Power, PoE fault

Safety – UL/cUL 60950–1 CE EN 60950–1 CCC CB

System Requirements Category 5 UTP Network cables or above Network card for each PC Network software (e.g., Windows®) Web browser (e.g., Internet Explorer – 6.0 or higher, Netscape 6.0 or higher)

Administrative Switch Management – IEEE 802.1Q static VLAN – (128 groups, static) IEEE 802.1p Class of Service (CoS) Port-based QoS DSCP-based QoS DiffServ IEEE802.3ad link aggregation – (manual or LACP) IEEE 802.1D Spanning Tree – Protocol (STP) IEEE 802.1w Rapid Spanning – Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning – Tree Protocol (MSTP) IEEE 802.1ab Link Layer Discovery – Protocol (LLDP) LLDP-MED SNMP v1, v2c, v3 RFC 1213 MIB II RFC 1643 Ethernet interface MIB RFC 1493 bridge MIB RMON group 1, 2, 3, 9 RFC 2131 DHCP client Voice VLAN Auto-VOIP DHCP Filtering Auto denial-of-service (DoS) protection HTTP and HTTPS Ping and traceroute Power saving when link down IEEE 802.1× Port-based security by locked – MAC addresses IP and MAC ACL Storm control for broadcast, multicast and unknown unicast packets IGMP snooping v1/v2/v3 Protected Port PoE Timer Port-based ingress and egress rate – limiting SNTP Port mirroring support (many to one) Static Routing (support for up to 10 static routes) Web-based confi guration Confi guration backup/restore Password access control RADIUS Support TACACS+ support Syslog Firmware upgradeable Cable test

Performance Specifications Forwarding modes: Store-and-forward Bandwidth: 17.6 Gbps Network latency: <20µs for 64-byte – frames in store-and-forward mode for 100 Mbps to 100 Mbps transmission Buffer memory: 1.5 MBytes per system Address database size: 4,000 media access control (MAC) addresses per system Addressing: 48-bit MAC address Mean time between failures (MTBF): 230,731 hours at 25C (~26.4 years) Acoustic noise: 34.5 dBA

Modules AGM731F 1000BASE-SX SFP Module AGM732F 1000BASE-LX SFP Module AGM733 1000BASE-ZX SFP Module AFM735 100BASE--FX SFP LC Module

Warranty NETGEAR Lifetime Warranty

Package Contents 52-port PoE Smart Switch with 4 Gigabit Ports (FS752TP) Rubber footpads Power cord Rack-mount kit Resource CD Installation guide